- 89 -
8.55 ^GF GRAPHIC FIELD
Format: ^GFa,b,c,d,data
a = Compression type
A : ASCII HEX
For B64 (Base64), [:B64:] is placed at the data head.
For Z64 (LZ77), [:Z64:] is placed at the data head.
Operation is performed with such set values as used for Zebra.
B : Binary
C : Compressed binary (unsupported)
When omitted: Not printed
* If "C: Compressed binary" is selected, operation is performed with "A: ASCII HEX."
b = Bytes in binary data
0 to 999999
When omitted: Not printed
c = Bytes in graphic field
0 to 999999
The value of this parameter is ignored.
d = Bytes per row
0 to 1249
When omitted: Not printed
* If this is set to a value exceeding 1249, graphic is not printed.
data = Data
ASCII HEX data
0x00 to 0xFF
*1 When the [B64]/[Z64] format is saved, the data are read and printing is continued whether CRC is
normal or abnormal.
*2 Even if ^FS does not exist after the data of ^GF command, the command is deemed to be valid and
graphic is drawn.
*3 When the compression type is A and ASCII, even if the graphic data is smaller than the number of
bytes specified in the command, the received data are saved as valid data.
*4 ^GFA and ^GFB between ^DF and ^XZ are also supported.
