- 23 -
5.15 SELECTION OF LABEL LENGTH (LL) COMMAND ON/OFF
When “DISABLE” is selected, the Zebra command ^LL is ignored. Instead, the label length set by the
Zebra system mode becomes effective.
5.16 SELECTION OF LABEL TYPE (MN) COMMAND ON/OFF
When “DISABLE” is selected, the Zebra command ^MN is ignored. Instead, the label type set by the
Zebra system mode becomes effective.
5.17 SELECTION OF MEDIA TYPE (MT) COMMAND ON/OFF
When “DISABLE” is selected, the Zebra command ^MT is ignored. Instead, the media type set by the
Zebra system mode becomes effective.
Since the LE840D is a direct thermal printer, it always behaves in the same way as “DISABLE” (No
ribbon), regardless of the setting of this parameter.
5.18 SELECTION OF TONE ADJUST (SD) COMMAND ON/OFF
When “DISABLE” is selected, the Zebra command ~SD is ignored. When “ENABLE” is selected, the
print tone fine adjustment value set by the Oki Data printer system mode is overwritten with ~SD
command value.
FEED
RESTART
FEED
RESTART
•
ENABLE
•
DISABLE
•
ENABLE
•
DISABLE
FEED
RESTART
•
ENABLE
•
DISABLE
FEED
RESTART
•
ENABLE
•
DISABLE
