- 24 -
5.19 SELECTION OF TONE ADJUST (MD) COMMAND ON/OFF
When “DISABLE” is selected, the Zebra command ^MD is ignored. When “ENABLE” is selected, the
TPCL print tone command is generated.
5.20 SELECTION OF GRAPHIC PRINTING MODE
When “SPEED-ORIENTED” is selected, print speed is given priority over the print position precision.
When “PRECISE POSITION” is selected, print position precision is given priority over the print speed.
In this case, the printer performs the bit shift processing to print graphics in accurate position.
5.21 SELECTION OF TAB-TO-SPACE CONVERSION
Select a number from 0 through 9 for an applicable digit by pressing the [FEED] or [RESTART] keys.
Pressing the [PAUSE] key determines the value for the selected digit, then the cursor moves to the next
digit. (After setting a value for the last digit, the tab-to-space conversion value takes effect and the next
parameter is shown.)
When a tab (09h) code is included in data, this tab code is replaced by a space corresponding to the set
value (20h).
Since spaces are inserted to simulate the tabs included in the print image printed by the Zebra printer,
printer behavior according to this parameter is considered as the specification.
FEED
RESTART
•
ENABLE
•
DISABLE
FEED
RESTART
FEED
RESTART
•
SPEED-ORIENTED
•
PRECISE POSITION
0
1
0 to 99
8
9
