
44
Loading the media
11
Lower the pressure roller up / down lever.
After this, follow the instructions on LCD screen.
Note
To lower (press) the pressure roller, lower the pressure
roller up/down lever to the lowest position (see the
Note
of Step 6 on page
12
CHECK EDGE GUARD
OK ?
Open the front cover and align the media
edge guards over the both ends of the media.
Then, close the front cover.
Check that the media edge guards do not go under the
media and that thick media is not stuck between them.
After visually confirming that the media edge guards are
properly set, press the
OK
button.
13
SELECT MEDIA TYPE
2
XX: XXX
SELECT MEDIA TYPE
2
01: PAPER
Select the media type.
Select a registered media type using the
Up
and
Down
buttons, then press the
OK
button.
14
SELECT MEDIA TYPE
2
XX: XXX
SELECT MEDIA TYPE
2
01: PAPER
• • •
(Display the media presets)
SELECT MEDIA TYPE
CREATE NEW PRESET
(Enter the media preset menu)
To create a new media preset
At the end of the media preset list,
CREATE NEW
PRESET
is displayed.
Press the
OK
button to enter the media registration
menu.
The procedure to create a preset is the same as in
the MEDIA REG menu.
Press the
CANCEL
button to cancel the entered
parameters.
Summary of Contents for IP-5530
Page 24: ...24...
Page 70: ...70 Loading the media...
Page 246: ...246 Troubleshooting...
Page 265: ...47106202EE Rev3...