manualshive.com logo in svg

Oki IP-5530, User Manual, Page: 125 / 265

Share
Download
Oki IP-5530 User Manual Download Page 125

125

Maintenance

15

 

 

REMOVE GRAY SHEET 
  

 

 

                 

  

Remove the gray sheet (cap cleaning sheet) 
and press the 

OK

 button.

16

 

 

CLOSE COVERS

 

                 

  

Close the capping unit cover and the front 
cover.

 

 

CARRIAGE IS MOVING 
PLEASE WAIT

 

                 

  Carriage stops moving.

The carriage moves to the home position.

 

 

START CLEANING 
 BOTTLE IS EMPTY?

 

                 

  

Press the OK button.

Check visually that the waste ink bottle is not full.

 

 

PH RECOVERING  

 

REQUIRED TIME 

XX:XX

 

                 

  

(The cleaning starts.) 

 

 

>PH MAINTENANCE  

   

2

SHEET MOUNT CLNG 

Sheet mount cleaning is complete.

 Note 

 

‹

If the current procedure is interrupted by an error before you remove the pink sheet and the gray sheet, follow the 
procedure below to remove the sheets.

  1. Move the carriage to the maintenance area. (See Head guard cleaning on 

 page 126.)

  2. Open the front cover, and then the capping unit cover.
  3. Remove the pink sheet and the gray sheet that remained on the caps.
  4. Close the capping unit cover, and then the front cover.
  5. Move the carriage to the home position.
  6. Perform a strong cleaning. (See Strong cleaning on 

 page 226.)

Be

fo

re

 p

rin

tin

g

Lo

adi
ng

 the

 m

edi

a

A

dj

us

tm

ent

M

ai

nt

enan
ce

A

dv

an

ce

d 

op

er

ati

on

s

Trou
ble

sh

oo

tin

g

M

enu

 tr

ee

Ap
pe

nd

ix

Summary of Contents for IP-5530










































































































































































































































































Reviews:

No comments