manualshive.com logo in svg

Oki IP-5530, User Manual, Page: 23 / 265

Share
Download
Oki IP-5530 User Manual Download Page 23

23

FFTSS
Library,
Employed
by
the

Software
Installed
on
the
Printer

The software of the controller integrated in the printer (hereinafter called as Software) employs the FFTSS Library 
developed by Dr. Akira Nukada.
The FFTSS Library is a part of the research achievement of the project, 

The Innovation of Simulation Technology and the Construction of Foundations for Its Practical Use in the 
research area, 
Development of Software Infrastructure for Large Scale Scientific Simulation
promoted by the Strategic Basic Research Programs(CREST) of Japan Science and Technology Agency.

The Software including the FFTSS is supported by OKI Data Corporation, and the FFTSS library’s developers and its 
related organizations do not undertake any responsibility and obligations on the Software.

Summary of Contents for IP-5530










































































































































































































































































Reviews:

No comments