Oki IP-5530 User Manual Download Page 149

Page: 149 / 265

149

Advanced operations

Check the USB connection status

During printing

The USB connection status cannot be checked during printing.
Check the connection when the printer is not printing.

Not during printing

PRINTER READY
01: PAPER / 1626mm

Press the

MENU

button.

INFORMATION

Press the

Down

button to select

INFORMATION

, and then press the

button.

>INFORMATION

WARNING INFO

Press the

Down

button to select

USB INFO

>INFORMATION

USB INFO

Press the

button.

>>USB INFO

ADDRESS:XXX

The panel displays the USB address.

If the address is different from

000

, the address is valid.

Note

If the panel displays the USB address as

000

, connect the

USB cable connection once again.

>>USB INFO

ADDRESS

:XXX

Press the

Down

button to select

SPEED

The printer checks the connection speed.

>>USB INFO

SPEED

:XXXXX

The panel displays the USB connection speed.

The panel should display

If the panel displays

, the print process will be slower.

Summary of Contents for IP-5530










































































































































































































































































Search results

Summary of Contents for IP-5530

Reviews:

Oki IP-5530, User Manual, Page: 149 / 265

Search results

Summary of Contents for IP-5530

Reviews: