Oki CX4545 MFP, Printing Manual

Page: 36 / 230

2 PRINTING FROM WINDOWS
34 Setting Up Print Options
4) Units
Select the unit for the Tab Extension and Image Shift option. The default unit varies depending on the regional setting
of the client computer.
 Tab paper must be fed from the bypass tray. Make sure to place it with its tab outside. The shape of the bypass tray
differs depending on the model.
 The tab paper cannot be fed from the Large Capacity Feeder (optional) and drawers.
 If the document for tab printing is not created properly or the [Image Shift Width] is not set properly, the image will
not be printed in the correct position within the tab extension. Please make sure to create the document and set the
[Image Shift Width] correctly.
 If misprinting occurs while multiple tab pages are printed continuously, dirt may adhere to the reverse side of paper.
To avoid this, it is recommended to print tab paper as a separate job for each page so that this equipment performs
cleaning before printing the next tab paper.
 When printing tab paper, the tab paper may be caught in the exit in the inner tray because the roller to deliver the
tab extension does not exit. In that case, remove the tab paper before printing a next job.
For the detailed instructions on how to print on tab paper, see the following page:
 P.108 “Printing on tab paper”
Place the tab paper
with the tab outside.