Oki CX4545 MFP, Printing Manual

Page: 69 / 230

2.PRINTING FROM WINDOWS
Setting Up Print Options 67
2 PRINTING FROM WINDOWS
3) SNMP V3
If SNMP V3 is enabled, select one of the following items to set how users are authenticated.
User ID File — Select this option when you want to use a user ID file. Click [Browse] and specify the user ID file.
User Name/Password — Select this option when you want to use the user name and password. When this option is
selected, use the keyboard to select the following items:
- User Name
- Authentication Protocol
- Authentication Password
- Privacy Protocol
- Privacy Password

If you select to enable SNMP V3, consult your network administrator for preliminary advice on how to
authenticate users.
 Up to 31 characters including the following symbols can be entered for each of the User Name, Authentication
Password and Privacy Password.
! $ % & ' ( ) - , < > @ [ ] ^ _ ` { } ~
4) [Restore Defaults]
Click this button when you want to reset all the settings back to the defaults.
Add Printer
1) Discovered Printers
This displays the OKI MFP series discovered over a network. You can check its name, installation site, model name
and status.
The OKI MFP series to be discovered differ depending on the settings on the [Device Settings] tab or the type of
your printer driver.
 If any of the models below is selected in the [Model Selection] box on the [Device Settings] tab, only they can
be discovered and other OKI MFP series models are not.
- ES9160 MFP
- ES9170 MFP
- ES9460 MFP
- ES9470 MFP
- CX3535 MFP
- CX4545 MFP
 If [PCL] is selected in the [Model Selection] box on the [Device Settings] tab, any OKI MFP series model to
which your printer driver can be applied is discovered.
2) [Add]
This adds the printers selected in the [Discovered Printers] box to [Printer Folder].
1
3
4
2