Oki CX 1145 MFP Admin Manual Download

Page: 235 / 323

7 TopAccess Administrator Mode

234 Registering from TopAccess

Click [Add].

All recipients in the selected groups are added in the Recipient List page.

You can remove the contacts that you added in the recipient list before saving the desti-
nation settings.

P.236 “Removing the contacts from the recipient list”

Click [Save].

The contacts are added as the destinations.

Searching for recipients in the LDAP server

By this method, you can search for recipients in the registered LDAP server and in the address
book.

Click [Destination Setting] to open the Recipient List page.

Click [Search].

The Search Contact page is displayed.

Summary of Contents for CX 1145 MFP




































































































































































































































































































































Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands

Oki CX 1145 MFP, Admin Manual

Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands