Oki CX 1145 MFP Admin Manual Download

Page: 192 / 323

Maintaining from TopAccess 191

Select the software that you are going to upload in the “Upload
Files” drop down box.

Driver Files

— Select this to upload the setup driver files.

Macintosh PPD Files

— Select this to upload the self-extracting files that contains the

Macintosh PPD files for Mac OS 8.6/9.x and Mac OS X.

Unix Filters

— Select this to upload the tar files that contains filters for each UNIX

workstation.

Point And Print

— Select this to upload the printer driver files for the Point and Print

installation.

Click [OK].

The bottom section in the page will be changed for selected software.

In each field displayed, click [Browse] to locate the setup files to be
uploaded.

At the left of each field, the file name will be displayed. Be sure to specify the same file
for each field.

The files for uploading are provided for each client software.

Driver Files

— Contact your dealer for information about obtaining these files.

Macintosh PPD Files

— Provided in the “MacPPD” folder of the Drivers & Network Utili-

ties CD-ROM.

Unix Filters

— Provided in the Drivers & Network Utilities CD-ROM.

Point And Print

— Contact your dealer for information about obtaining these files.

Click [Upload].

Specified files are uploaded in this equipment.

Summary of Contents for CX 1145 MFP




































































































































































































































































































































Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands

Oki CX 1145 MFP, Admin Manual

Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands