Oki CX 1145 MFP, Admin Manual

Page: 133 / 323

7 TopAccess Administrator Mode
132 Setting up from TopAccess
3) NetBIOS Name
Enter the NetBIOS name of this equipment. The equipment uses “MFP-<NIC Serial Num-
ber>” as the default NetBIOS name.
You can enter only alphanumeric characters and “-” (hyphenation) for NetBIOS name. If you
use any other characters, a warning message will be displayed.
4) Logon
Enter the workgroup or domain that this equipment joins.
- Workgroup — Select this and enter the workgroup name when the equipment will logon
in the workgroup. All client computers can access this equipment without a user name
and password.
- Domain — Select this and enter the domain name when the equipment will logon in the
domain. Any client computers which are not a member of the domain will need a valid
user name and password to access this equipment. Use this for a more secure access
to this equipment.
When the “Obtain a Domain Name automatically” option (For IPv6, "Use DHCPv6 Server for
options"option) is enabled in the TCP/IP settings, the domain name can be obtained using
the DHCP server.
P.120 “Setting up the TCP/IP (IPv4)”
P.123 “Setting up the IPv6”
You can enter only alphanumeric characters and symbols except following characters for
Workgroup.
; : “ < > * + = \ | ? ,
If you use any other characters, a warning message will be displayed.
5) Primary Domain Controller
Specify the server name or IP address of the primary domain controller when this equipment
will logon the domain network.
6) Backup Domain Controller
Specify the server name or IP address of the backup domain controller when this equipment
will logon the domain network, if required. If the Primary Domain Controller is unavailable,
the Backup Domain Controller will be used to logon.
If the wrong primary or backup domain controller is specified, the NIC INITIALIZING mes-
sage will be displayed for 5 to 10 minutes while this equipment searches for the primary or
backup domain controller. In that case, correct the primary or backup domain controller set-
ting after the NIC INITIALIZING message disappears.
7) Logon User Name
Enter a valid user name that is able to logon the specified domain.
8) Password
Enter the password for the specified logon user name to logon the domain network.