Oki CX 1145 MFP Admin Manual Download Page 205

Page: 205 / 323

7 TopAccess Administrator Mode

204 Maintaining from TopAccess

In Any Scan Notification Events, check the boxes for scanning sta-
tus to be notified.

When “Send email when an error occurs” is enabled, the following events will be notified.
-

Failed to acquire resource.

Failed to delete files automatically by Storage Maintenance.

In Scan Notification Events, check the boxes for scanning status to
be notified.

When these are enabled, the following events will be notified.
When “Warning” is enabled:
-

Deleting files automatically by Storage Maintenance is successfully done.

When “Information” is enabled:
-

Deleting manually by the Delete Files function in the Maintenance menu is success-
fully done.

Summary of Contents for CX 1145 MFP




































































































































































































































































































































Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands

Oki CX 1145 MFP, Admin Manual

Search results

Summary of Contents for CX 1145 MFP

Reviews:

Related manuals for CX 1145 MFP

Brands by name

Popular brands