Oki C3400n Maintenance Manual Download Page 39

Page: 39 / 183

Oki Data CONFIDENTIAL

43163501TH Rev. 1

39 /

Load Paper in Paper Cassette

(1) Pull out the paper cassette.

Note!

Do not remove the cork on the plate.

(2) Conform the paper guide to the paper size and fix it firmly.

Plate

Cork

Paper Guide

(3) Shuffle the sheets of paper and arrange up, down, left and right properly.

(4) Make the printable side down and set the paper.

Note!

• Place the paper in front of the paper cartridge.
• Set the paper not to exceed “

▼

”mark of the paper guide. (250 sheets weighing 70kg)

(5) Fix the paper by the paper stopper.

(6) Return the paper cassette to the printer.

Printing face down

Paper Stopper

Paper life display

Summary of Contents for C3400n
























































































































































































Search results

Summary of Contents for C3400n

Reviews:

Related manuals for C3400n

Brands by name

Popular brands

Oki C3400n, Maintenance Manual

Search results

Summary of Contents for C3400n

Reviews:

Related manuals for C3400n

Brands by name

Popular brands