Oki C3400n Maintenance Manual Download Page 105

Page: 105 / 183

Oki Data CONFIDENTIAL

43163501TH Rev. 1

105 /

6.5 Cleaning the inside of the printer

CLEANING THE INSIDE OF THE PRINTER

According to printing patterns, the metal shaft between fuser and cyan image drum cartridge may
be stained with toner. If this happens, please clean your printer.

(1)

Switch off the power supply.

OPEN button

(2)

Press OPEN button and open the top cover.

The fuser unit is extremely hot. Do not touch it.

Personal injuries may occur.

(3) Take out the image drum cartridge.

1. Take out the 4 image drum cartridges and put them on a flat surface.
2. Cover the 4 image drum cartridges with black paper.

Note!

• The image drum (the green cylinder) is very easy to be damaged, please be careful

when handling it.

• Don’t put the image drum cartridges in direct sunlight or strong light (above1500 lux).

And don’t put them in indoor lighting condition for more than 5 minutes.

Summary of Contents for C3400n
























































































































































































Search results

Summary of Contents for C3400n

Reviews:

Related manuals for C3400n

Brands by name

Popular brands

Oki C3400n, Maintenance Manual

Search results

Summary of Contents for C3400n

Reviews:

Related manuals for C3400n

Brands by name

Popular brands