Oki Data CONFIDENTIAL
43163501TH Rev. 1
98 /
• If you want to specify the PU serial number, please add a “0” (a normal-width zero) then
input the 11-digit number. (Please notice that when read out, the number will be 10
digits.)
As shown in the following image, on the menu of [PU serial number setting], eliminate
the 2-digit revision number then add a normal-width zero to the 10-digit number and
input it.
Add one-byte 0 to the top of 10-digit figure of Lot.NO.
Set "0AE47027880" in the setting screen.
Revision
Ser.NO. 4AEL4011702K
Lot.NO. AE47027880 A0
Made in Thailand
Configured in UK
• PU serial number will be output to the Printer Serial Number column in the header of
Status Page. For this reason, check of PU serial number is performed by printing
Status Page.
• After the configuration in the UK factory, when facing OEL, the PU serial number is
taken as Lot Number and shown in the Lot Number: column of the last line which is in
the header of the Status Page.
Figure of Serial No. label image (labeled in UK Factory)
(1-2) Set the CU serial number
SAP serial number can be applied to the device. The SAP serial number is displayed
in the highest rung of the serial number label. It is a 12-digit number including
production place (2 digits), production year (2 digits), sequence number (6 digits) and
revision number (2 digits).
• CU serial number is given an original number which is within 12 digits in the UK factory.
• Please notice that if you set the CU serial number, the menu setting in CU will be reset
(back to the default setting). (For reference, Maintenance utility operation manual)
• On the menu of [Section 2.4.1.1.4.3, Serial number information setting] of [Section
2.4.1.1.4 CU circuit board setting function], set the [Choose printer serial number] to [CU
serial number] and [Output mode] to [Show both].
• If you want to specify the CU serial number, please input the 12-digit number. (When
read out, it will be 12 digits, too.)
Input 12 digits for Ser. NO. Input "4AEL4011702K".
Ser.NO. 4AEL4011702K
Lot.NO. AE47027880 A0
Made in Thailand
Configured in UK
Figure of Serial No. label image (labeled in UK Factory)
