Oki C3400n Maintenance Manual Download Page 135

Page: 135 / 183

Oki Data CONFIDENTIAL

43163501TH Rev. 1

135 /

Jam Release Method

Fuser Unit Part [code: 381 (Paper feeding jam) and 382 (paper eject jam)]

The fuser unit is extremely hot. Be careful not to touch it. If the fuser
unit is hot, do not try yourself to clear paper but wait until the fuser
unit becomes cool.

Possible to get burned.

(1) Raise the fuser lock lever (two blue places) in the direction of the arrow.

(2) Hold the handle and take the fuser out, put it on a flat table.

(3) Draw the jammed paper out slowly in the direction of the arrow, while pressing the lever of

the fuser (blue) in the direction of the arrow.

Fuser lock lever (blue)

Handle

Fuser lock lever (blue)

Release lever (blue)

Summary of Contents for C3400n
























































































































































































Search results

Summary of Contents for C3400n

Reviews:

Related manuals for C3400n

Brands by name

Popular brands

Oki C3400n, Maintenance Manual

Search results

Summary of Contents for C3400n

Reviews:

Related manuals for C3400n

Brands by name

Popular brands