72
OKIFAX 4500
BUSY TONE DETECT:
This function allows your fax machine
to detect a busy tone when sending a fax. Available settings are
on and off.
MF(TONE)/DP(PULSE):
This function controls what method
your fax machine uses for dialling. Two dialling methods are in
common use. DP, or dial pulse dialling, uses monotone pulses
to dial a number (like a rotary telephone). MF, or multi-frequency
dialling (touch tone), uses different tones to dial a number.
Available settings are MF and DP.
PULSE DIAL RATE:
If your fax machine is set to pulse dialling,
this function controls how quickly your fax machine sends out
dialling pulses (the dial pulse rate varies in different countries).
Available settings are 10 pps, 16 pps and 20 pps.
PULSE MAKE RATIO:
Available settings are 33% and 39%.
PULSE DIAL TYPE:
If your fax machine is set to pulse dialling,
this function controls the type of pulse dialling used (different
types of pulse dialling are used in different countries). Available
settings are N, 10-N and N+.
MF(TONE) DURATION:
If your fax machine is set to tone
dialling, this function controls the duration of the tones used for
dialling (the tone duration varies in different countries). Available
settings are 75 ms, 85 ms, and 100 ms.
PBX LINE:
Turn this function on if your fax machine is
connected to a PBX. Once this function has been turned on and
the dial prefix function has been programmed, your fax machine
will recognize the dial prefix number you use in your PBX to
get an outside line. After it dials your dial prefix number, your
fax machine pauses to wait for an outside line before dialling
the rest of the telephone number. Available settings are on and
off. See Connecting to a PBX in the Installation chapter for
instructions on changing this setting.
FLASH/EARTH/NORMAL:
If your fax machine is connected
to a PBX, this function tells your fax machine about the type of
PBX line your fax machine if connected to. Available settings
are normal (N), flash (F) and earth (E).
AUTO START:
When this function is turned on, your fax
machine automatically begins dialling as soon as you have
selected a location by pressing a One Touch key or entering an
AUTO DIAL
code. You do not have to press the
START
key.
Available settings are on and off.
DIAL PREFIX:
If your fax machine is connected to a PBX,
use this function to tell your fax machine what access number is
used to obtain an outside line from your PBX. You can enter up
to 4 digits. See Connecting to a PBX in Installation for
instructions on changing this setting.
Changing Dial Parameter Settings
1.
Press the
SELECT FUNCTION
key.
2.
Press the
USER PROG
One Touch key. The display shows:
1:FUNC. PROGRAMMING
YES (
ß
ß
ß
ß
ß
) NO (
à
à
à
à
à
/1-7)
Summary of Contents for B4500 Series
Page 1: ...User s Guide OKIFAX 4500...
Page 14: ...14 OKIFAX 4500 Control Panel...
