Oki B4500 Series, User Manual

Page: 29 / 96

User’s Guide 29
English
10. Press the START key to save your entry.
11. Press the SELECT FUNCTION key to finish.
Setting Language
Your fax machine comes with two languages installed, which
appear on the display and in reports. Follow the instructions
below to switch languages.
Note: Your dealer may be able to provide you with
additional languages.
1. Press the
SELECT FUNCTION
key.
2. Press the
USER PROG
One Touch key. The display shows:
1:FUNC. PROGRAMMING
YES (
ß ß ß ß ß
) NO (
à à à à à
/1-7)
3. Press the
ô
YES
key. The display shows:
FUNCTION NO.[ ]
ENTER 01-28
4. Using the numeric keypad, enter 14. This display shows:
14:USER LANGUAGE
[****] YES (
ß ß
ß ß
ß
) NO (
à à
à à
à
)
Note: [****] indicates which language your fax machine
is already using.
5. Press the
NO
õ
key to switch to the other installed language.
6. To accept the language change, press the
ô
YES key.
7. Press the SELECT FUNCTION key to finish.
Connecting to a PBX
A PBX (Private Branch Exchange) is a private telephone system
used to route internal calls. If you have to dial a prefix (access)
number to get an outside line, then your line is connected to a
PBX.
If you are connecting your fax machine to a PBX, follow the
instructions below. These setting changes allow your fax machine
to identify your PBX’s outside line dial prefix digits in the
numbers that you program or dial in your fax machine. After it
dials the prefix digits, your fax machine will wait until it sees
that an outside line is available before dialling the rest of the
number.
Caution: In some countries you may require service
assistance to make these changes. Also, some PBX
installations may require additional adjustments to your
fax machine. If you continue to have difficulty with fax
communication after following these steps, contact your
dealer.
1. Press the
SELECT FUNCTION
key.
2. Press the USER PROG One Touch key. The display shows:
1:FUNC. PROGRAMMING
YES (
ß ß ß ß ß
) NO (
à à à à à
/1-7)
3. On the numeric keypad, press 2. The display shows:
2:DIAL PARAMETER
YES (
ß ß ß ß ß
) NO (
à à à à à
/1-7)