Oki B 6100, Technical Manual

Page: 47 / 516

OKI B6100 Laser Printer - Base Engine Technical Manual 3-27
Version 1.0
Primary FIPs:Error Codes
3.12 E2-1:MISFEED JAM
There is a paper jam at the Sensor Photo:Regi. The paper does not reach the Sensor Photo:Regi within the specified
time.
Step Actions and Questions Yes No
1
Inspect the following components.
• Cassette Assy (PL21.1.1)
• Feeder Assy (PL3.1.19)
• Clutch Assy Feed (PL3.1.37)
• Sensor Photo: Face Control Paper (PL3.1.13)
• Motor Assy (PL2.2.22)
• Clutch Assy Turn (PL3.1.2)
• Roll Assy Turn (PL3.1.1)
• Chute CST (PL5.1.27)
• Chute Bottom Lower (PL5.1.26)
• Sensor Photo:Regi (PL5.1.12)
• Actuator Regi (PL5.1.10)
• Spring Sensor Regi (PL5.1.11)
• Clutch Regi (PL5.1.19)
• Roll Regi Metal (PL5.1.5)
• Roll Regi Rubber (PL5.1.7)
• Roll Assy (PL2.2.8) of the Cassette Sub-Assy (PL2.2.1)
• Option Feeder Assy (PL11.1.1)
• Gear Assy Drive (PL8.1.13)
• PWBA Feeder (PL3.1.36 or PL11.2.36)
• PWBA Side 1 (PL 9.1.19)
• PWBA Conn (PL10.1.11)
• PWBA HKB26 MCU (PL10.1.13)
• PWBA HKB PS (PL10.1.17)
• Harness Assy Regi (J43-J431, J423) (PL5.1.28)
• Harness Assy Feeder (J33-J331) (PL9.1.13)
• Harness Assy Size M (J51-P511) (PL9.1.20)
• Harness Assy Conn (J23-J231) (PL10.1.10)
Go to step 2. Replace the
problem com-
ponent.
2
Is the paper that is loaded in the paper tray wrinkled or
damaged?
Replace with
fresh, dry
paper.
Go to step 3.