Oki B 6100, Technical Manual

Page: 335 / 516

OKI B6100 Laser Printer - Base Engine Technical Manual 10-181
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 9.1.7 Housing Assy Size Sensor (with 13-21)(Reference Only)
continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the
Cover Assy I/F
(RRP 1.1.2).
4. Remove the Cover Left (RRP 1.1.1).
5. Remove the
Plate Assy Left
(RRP 9.1.1).
6. Remove the
Plate Handle
(RRP 9.1.3).
7. Unplug the connector (P/J33) from the
MCU HKB PWB
(PL10.1.13).
8. Release three clamps on the harness of Housing Assy Size Sensor from the printer.
In the following steps, do not detach the
Housing Assy Size Sensor
and the printer
far away because they are connected with the harness.
9. Pushing a boss that secures the
Housing Assy Size Sensor
to the printer with a small
screwdriver, draw off the
Housing Assy Size Sensor
toward the rear.
10. Draw the harness of
Housing Assy Size Sensor
from the hole in the printer.
Replacement
1. Insert the harness of
Housing Assy Size Sensor
into the hole in the printer.
2. Align four hooks of
Housing Assy Size Sensor
with four holes in the printer.
3. Pushing the rear of
Housing Assy Size Sensor
, slide it toward the front and secure four
hooks of
Housing Assy Size Sensor
to four holes in the printer.
4. Plug the connector (P/J33) to the MCU HKB PWB (PL10.1.13).
5. Secure the harness of
Housing Assy Size Sensor
to the printer with three clamps.
6. Mount the
Plate Handle
(RRP 9.1.3).
7. Mount the
Plate Assy Left
(RRP 9.1.1).
8. Mount the Cover Left (RRP 1.1.1).
9. Mount the
Cover Assy I/F
(RRP 1.1.2).
10. Mount the Cover Front L/H (RRP 1.1.10).
11. Mount the
Cover Assy Front
(RRP 1.1.8).