Oki B 6100, Technical Manual

Page: 267 / 516

OKI B6100 Laser Printer - Base Engine Technical Manual 10-113
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 5.1.5 Sensor Photo:Regi (PL5.1.12) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the
Chute MBF Assy
(RRP 4.1.1).
4. Remove the Shaft 14 (RRP 5.1.10).
5. Remove the
Gear 14
(RRP 5.1.10).
6. Remove the
P/H Assy
(RRP 5.1.1).
7. Open upward the
Chute Upper
(PL5.1.6) together with
Holder Toner Sensor
(PL5.1.2) from the
P/H Assy (PL5.1.4).
8. Remove the
Actuator Regi
(RRP 5.1.4)
9. Unplug the connector (P/J432) from the
Sensor Photo
.
10. Disengage three hooks that secure the
Sensor Photo
, and remove the
Sensor Photo
from the
rear side of
P/H Assy
.
Replacement
1. Aligning the position exactly, secure the
Sensor Photo
to the
P/H Assy
(PL5.1.4) with three
hooks.
2. plug the connector (P/J432) in the
Sensor Photo
.
3. Mount the
Actuator Regi
(RRP 5.1.4).
4. Close down-ward the
Chute Upper
(PL5.1.6) together with
Holder Toner Sensor
(PL5.1.2) from
the
P/H Assy
.
5. Mount the
P/H Assy
(RRP 5.1.1)
6. Mount the
Gear 14
(RRP 5.1.10).
7. Mount the Shaft 14 (RRP 5.1.10).
8. Mount the
Chute MBF Assy
(RRP 4.1.1).
9. Mount the
Cover Front L/H
(RRP 1.1.10).
10. Mount the
Cover Assy Front
(RRP 1.1.8).