Oki B 6100, Technical Manual

Page: 321 / 516

OKI B6100 Laser Printer - Base Engine Technical Manual 10-167
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 8.1.5 Sensor Assy CRU(with2,5,6) (Reference Only) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the
Cover Assy Rear
(RRP 1.2.3).
4. Remove the Cover Assy I/F (RRP 1.1.2).
5. Remove the
Cover Left
(RRP 1.1.1).
6. Remove the
Cover Assy Top
(RRP 1.1.4).
7. Remove the
Plate Assy Left
(RRP 9.1.1).
8. Remove the CRU Top Guide Assy (RRP 8.1.1)
9. Release the harness of
Sensor Assy CRU
from three clamps of
CRU Top Guide Assy
(PL8.1.4).
10. Deflecting the right bracket of
CRU Top Guide Assy
with a small screwdriver, draw off the
right shaft of
Sensor Assy CRU
.
11. Draw the left shaft of
Sensor Assy CRU
from the hole in the left bracket of
CRU Top Guide
Assy
.
Replacement
1. Insert the left shaft of
Sensor Assy CRU
into a hole in the left bracket of
CRU Top Guide
Assy
(PL8.1.4).
2. Deflecting the right bracket of
CRU Top Guide Assy
with a small screwdriver, insert the
right shaft of Sensor Assy CRU into a hole in the right bracket of CRU Top Guide Assy .
3. Secure the harness of
Sensor Assy CRU
with three clamps of
CRU Top Guide Assy
.
4. Mount the
CRU Top Guide Assy
(RRP 8.1.1)
5. Mount the
Plate Assy Left
(RRP 9.1.1).
6. Mount the Cover Assy Top (RRP 1.1.4).
7. Mount the
Cover Left
(RRP 1.1.1).
8. Mount the Cover Assy I/F (RRP 1.1.2).
9. Mount the
Cover Assy Rear
(RRP 1.2.3).
10. Mount the Cover Front L/H (RRP 1.1.10).
11. Mount the
Cover Assy Front
(RRP 1.1.8).