Oki B 6100, Technical Manual

Page: 89 / 516

OKI B6100 Laser Printer - Base Engine Technical Manual 5-21
Version 1.0
Primary FIPs:Image Quality Problems
5.14 Damaged Prints
PROBLEM
The printed page comes out of the printer either wrinkled, creased, or torn.
INITIAL ANALYSIS
1. Inspect the following components. Are they compatible with your printer
version, correctly installed, not damaged, deformed, or contaminated?
• Fuser Assy • Pressure Roll Assy
• Heat Roll
2. Inspect the printer paper path. Is it clear of foreign matter such as staples,
paper clips, and paper scrap?
Step Actions and Questions Yes No
1
PAPER CONDITIONS
Is there moisture in the paper?
Is the paper wrinkled?
Replace with
fresh, dry
paper.
Go to step 2
2
HEAT ROLL DAMAGE
Inspect the Heat Roll for scratches, objects, or contamination.
Is the Heat Roll free of scratches and contamination?
Go to step 3 Replace the
Heat Roll
3
PRESSURE ROLL DAMAGE
Inspect the Pressure Roll for scratches, objects, or contamina-
tion.
Is the Heat Roll free of scratches and contamination?
Go to step 4 Replace the
Pressure Roll
Assy
4
SKEWED IMAGE
Inspect the print.
Is the print image skewed?
Go to 8.13
Skewed
Image
Go to step 5
5
PAPER PATH
Inspect the paper path, between the feed tray and the exit tray,
for contamination or obstructions.
Is the paper path free of obstructions?
Go to step 6 Remove
obstructions
or contamina-
tion from the
paper path.
6
PAPER PATH ROLLS
Inspect the rolls along the paper path, between the feed tray
and the exit tray, for contamination, scratches, or damage.
Are the paper path rolls free of contamination, scratches,
or damage?
Return to Ini-
tial Analysis
Replace the
problem roller
Assy
engine fip5012FA