Oki B 6100, Technical Manual

Page: 504 / 516

15-2 OKI B6100 Laser Printer - Base Engine Technical Manual
Version 1.0
Printer Specifications
Section - 15 Printer Specifications
General Specifications
Category Specification
Printing method Electro-photographic system (roller charging, single compo-
nent magnetic toner development)
Exposure method Semiconductor Laser Beam Scanning
Laser specifications Class 1 Laser Product
Class 3B Laser, rated at 5mW output @ 780nm
Resolution 600/1200 dots per inch (dpi), switchable at full engine speed.
Fuser method Heat and pressure
Warm-up time From a cold start (22°C ambient temperature) to READY TO
PRINT within 70 seconds.
Power supply 100/120VAC (90~140VAC) 50/60Hz (47Hz ~63Hz)
220/240VAC (198~264VAC) 50/60Hz (47Hz ~63Hz)
Power consumption 100/120VAC printer: Maximum consumption: 800W Running,
45 W Sleep, Maximum current: 8A (100VAC)/6.66A (120VAC).
240VAC printer: Maximum consumption: 800W Running,
45W Sleep. Maximum current: 3.33A (240VAC).
Note: No electrical current is supplied to the Fuser Assy in
Sleep Mode.
Size and weight (not including the
CRU, PWB ESS or any options) Width 422mm X Depth 439mm X Height 413mm
Space requirements Front: Minimum 240mm
Back: Minimum 300mm
Sides: Minimum 200mm
Maximum paper size Legal 14" (8.5"X14" = 355.6mmX215.9mm)
Maximum printable area Entire page except a 4mm border on all four sides
Maximum paper load 550 sheets of RX 80 A4 (3R91805) paper, or Xerox 4200lb
Letter size paper.
Operating environment with CRU 5 ~ 35°C @ 15% to 85% RH (operating)
0 ~ 3,100 meter above sea level
Horizontal bias within 5° of level