Oki B 6100, Technical Manual

Page: 283 / 516

OKI B6100 Laser Printer - Base Engine Technical Manual 10-129
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 6.1.2 Chute Trans Assy (PL6.1.3) continued
Removal
1. Remove the
Cover Assy Front
(RRP 1.1.8).
2. Remove the Cover Front L/H (RRP 1.1.10).
3. Remove the
Chute MBF Assy
(RRP 4.1.1).
4. Remove the Shaft 14 (RRP 5.1.10).
5. Remove the
Gear 14
(RRP 5.1.10).
6. Remove the
P/H Assy
(RRP 5.1.1).
7. Remove the
BTR Assy
(RRP 6.1.1).
8. From the printer, remove the one screw securing the earth of Wire Assy DTS (PL6.1.10) to
the
Chute Trans Assy
.
9. From the printer, remove the one screw securing the earth of
Wire Assy TR
(PL6.1.11) to the
Chute Trans Assy
.
10. Remove the two screws securing the
Chute Trans Assy
to the printer.
11. Remove the
Chute Trans Assy
from the printer.
Replacement
Do not bend both springs of the Chute Trans Assy(placed the side of CR and the
side of DB),and attach them in accordance with the following procedures.
1. Align the
Chute Trans Assy
with its mount position to the printer.
2. Secure the
Chute Trans Assy
to the printer with two screws.
3. Secure the earth of
Wire Assy DTS
(PL6.1.10) to the front left hole in the
Chute Trans Assy
with one screw.
4. Secure the earth of
Wire Assy TR
(PL6.1.11) to the front right hole in the
Chute Trans Assy
with one screw.
5. Mount the
BTR Assy
(RRP 6.1.1).
6. Mount the P/H Assy (RRP 5.1.1).
7. Mount the
Gear 14
(RRP 5.1.10).
8. Mount the Shaft 14 (RRP 5.1.10).
9. Mount the
Chute MBF Assy
(RRP 4.1.1).
10. Mount the Cover Front L/H (RRP 1.1.10).
11. Mount the
Cover Assy Front
(RRP 1.1.8).