Oki B 6100, Technical Manual

Page: 179 / 516

OKI B6100 Laser Printer - Base Engine Technical Manual 10-25
Version 1.0
Removal and Replacement Procedures (RRPs)
RRP 1.1.9 Tray Assy MBF (PL1.1.17) continued
Removal
1. Open the
Cover Assy Front
(PL1.1.9).
2. Remove the Cover Assy Front (RRP 1.1.8).
3. Disengage the
Clip
(PL1.1.22) that secures the
Stopper Tray
(PL1.1.16) to the
Tray Assy MBF
.
In the following steps, do not detach Cover Assy Front and Tray Assy MBF far away
because they are linked with the
Stopper Tray
(PL 1.1.16).
4. Face the
Cover Assy Front
toward the rear, insert a small screwdriver into a gap at the
front right end between
Cover Assy Front
and
Tray Assy MBF
to deflect the right side of
Cover Assy Front
, and disengage the boss.
5. Insert a small screwdriver into a gap at the front left end between
Cover Assy Front
and
Tray Assy MBF
to deflect the left side of
Cover Assy Front
, and disengage the boss, then
detach the
Tray Assy MBF
.
6. Aligning the boss of
Tray Assy MBF
with a slit of
Stopper Tray
, remove the
Tray Assy MBF
from the
Cover Assy Front
.
Replacement
1. Aligning the boss of
Tray Assy MBF
with a slit of
Stopper Tray
(PL1.1.16), mount the
Tray
Assy MBF
.
In the following steps, do not detach
Cover Assy Front
and
Tray Assy MBF
far away
because they are linked with the
Stopper Tray
.
2. Face the
Cover Assy Front
toward the rear, insert the left boss of
Tray Assy MBF
into the
left hole in the
Cover Assy Front
.
3. Insert a small screwdriver into a gap at the front right end between Cover Assy Front and
Tray Assy MBF
to deflect the right side of
Cover Assy Front
, and engage the boss at the
front right end of Tray Assy MBF .
4. Secure the
Stopper Tray
to the shaft of
Tray Assy MBF
with the
Clip
(PL1.1.22).
5. Mount the Cover Assy Front (RRP 1.1.8).
6. Close the
Cover Assy Front
(PL1.1.9).