Oki B 6100, Technical Manual, Page: 45 / 516

OKI B6100 Laser Printer - Base Engine Technical Manual 3-25
Version 1.0
Primary FIPs:Error Codes
3.11 E2-0:EARLY FEED JAM
There is a paper jam at the Sensor Photo:Regi.
The paper arrives at the Sensor Photo:Regi too early.
Step Actions and Questions Yes No
1
Inspect the following components.
• Chute CST (PL5.1.27)
• Chute Bottom Lower (PL5.1.26)
• Sensor Photo:Regi (PL5.1.12)
• Actuator Regi (PL5.1.10)
• Spring Sensor Regi (PL5.1.11)
• Clutch Regi (PL5.1.19)
• Roll Regi Metal (PL5.1.5)
• Roll Regi Rubber (PL5.1.7)
• Roll Assy (PL2.2.8) of the Cassette Sub-Assy (PL2.2.1)
• Option Feeder Assy (PL11.1.1)
• Gear Assy Drive (PL8.1.13)
• PWBA Conn (PL10.1.11)
• PWBA HKB26 MCU (PL10.1.13)
• PWBA HKB PS (PL10.1.17)
• Harness Assy Regi (J43-J431, J423) (PL5.1.28)
• Harness Assy Conn (J23-J231) (PL10.1.10)
Are they compatible with your printer version, correctly
installed, not damaged, deformed, or contaminated?
Go to step 2. Replace the
problem com-
ponent.
2
Is a piece of paper or foreign object actuating the Sensor
Photo:Regi (PL5.1.12)?
Remove the
piece of paper
or foreign
object.
Go to step 3.
3
ROLL ASSY (PL2.2.8) and the CLUTCH ASSY FRICTION
(PL2.2.7) of the CASSETTE SUB-ASSY (PL2.2.1) ANALY-
SIS
1. Remove the CRU (PL8.1.1).
2. Actuate the Switch Assy I/L Front (PL10.1.12).
3. Observe the paper feed from the Feeder Assy using MAIN
MOTOR TEST.
Is only one sheet of paper fed from the Feeder Assy?
Go to step 4. Replace the
Roll Assy
(PL2.2.8) and
the Clutch
Assy Friction
(PL2.2.7).