Oki B 6100, Technical Manual

Page: 91 / 516

OKI B6100 Laser Printer - Base Engine Technical Manual 5-23
Version 1.0
Primary FIPs:Image Quality Problems
5.16 Misregistered Image
PROBLEM
The printed image is not centered on the page or is bleeding off of the page.
INITIAL ANALYSIS
1. Inspect the following components. Are they compatible with your printer
version, correctly installed, not damaged, deformed, or contaminated?
• CRU • BTR Assy
• BTR Chute Assy • P/H Assy
• Roll Assy MBF • Feeder Assy
• Cassette Assy • Plate Assy Bottom
• Main Tray • Retard Pad
• ROS Assy
2. Inspect the printer paper path. Is it clear of foreign matter such as staples,
paper clips, and paper scrap?
Step Actions and Questions Yes No
1
PAPER CONDITIONS
Is there moisture in the paper?
Is the paper wrinkled?
Replace with
fresh, dry
paper.
Go to step 2
2
SKEWED IMAGE
Inspect the print.
Is the print image skewed?
Go to 8.13
Skewed
Image
Go to step 3
3
REGISTRATION ADJUSTMENT
Generate a test print. Inspect the print.
Is the test print misregistered?
Go to step 4 Check the
application
software
printer set-
tings.
Replace the
PWB ESS .
4
CONFIGURATION MODE
Attach the Diagnostic Commander to the printer and enter
Configuration Mode (Appendix B).
Check NV codes 03 through 08, and 0D through 0I.
Are the NV codes set at the default values?
Go to step 5 Set the NV
values to the
default val-
ues, and
return to step
3.
engine fip5014FA