Oilon RE 110, Installation And Operation Manual

Page: 35 / 52

RE03 1406 EN 33 (48)
Fault
Operating line number Function
6710 Reset alarm relay
Relay can be reset through relay output QX, if heat
pump has failure data for external system. Failure
data at pump remains active.
6711 Reset HP
Reset heat pump, if failure is not active.
Service/special operation
Operating line number Function
7070–7093 Displays information about heat pump,
temperatures and temperature differences (min./
max.) between maintenance periods.
7120 Economy mode
7141 Emergency operation
7142 Backup operation function type
Input/output test
Operating line number Function
7700 Relay test
Every controller relay can be tested at this
operating line. Devices from various outputs can be
tested with this operating line, for example heating
circuit mixing valve or pumps.
NOTE! Operating line 7700 must be reset after
relay test back to value “No test”, otherwise heat
pump does not operate.
Displays also various measurements and status
data.
7812 Outside temp BX9
7814 Flow temp BX11
7811 DHW temp BX8
7813 Flow temp HP BX10
7810 Hot-gas temp BX7
7816 Source inlet temp BX13
Diagnosis heat generation
Operating line number Function
8400 Compressor 1
8401 Compressor 2
8402 El imm heater 1 flow
8404 Source pump
8406 Condenser pump