43
Defender 5000 Indicators Service Manual
4. Remove the protective backing from the back of the new Function Label. Carefully
position it on the Top Housing, starting at the bottom of the cover. Use a rolling motion
to smooth it into position.
5. Reconnect the Function Label cable and reserve step 1 to complete the indicator
assembly.
6. Power on for the function test.
5.4 Transformer Replacement
1. Unplug the Indicator from the AC power source.
2. Separate the Top Housing and Bottom Housing follow the step in Section 5.1.
3.
Remove the cable connector from the Transformer to the Main PCBA.
4.
Remove the cable connector from the Transformer to the AC Inlet connector.
5. Remove the four screws that secure the Transformer to the bottom housing, and lift it
off.
TD52P
TD52XW
6. Position the replacement Transformer with the screw holes aligned.
7. Attach the two cables from the Main PCBA and AC Inlet.
WARNING: Electric Shock Hazard. Disconnect the Indicator from power before
servicing.
CAUSION: Observe precautions for handling electrostatic sensitive device.
