25
Defender 5000 Indicators Service Manual
2.8.4 Time
Set the time.
24 hour format
00 to 23 = hour position
00 to 59 = minute position
2.8.5 Project ID
Set the Project identification.
Refer to Section 3.2 Menu Navigation to enter settings.
2.8.6 Scale ID
Set the Project identification.
Refer to Section 3.2 Menu Navigation to enter settings.
2.8.7 Reset
If Reset is selected and confirmed, all the submenu value will be set to default.
2.9 Communication
Enter this menu to define external communication methods and to set printing parameters.
Data may be output to either a printer or PC.
Factory default settings are shown in
bold
.
2.9.1 RS232/2
nd
RS232 Configuration
Communication
Options(bold is default)
RS232/2
nd
RS232
Configuration
Baud Rate
300, 600, 1200, 2400, 4800,
9600
, 19200, 38400,
57600
Parity
7 Even, 7 Odd, 7 None,
8 None
Stop Bit
1 bit
, 2 bit
Handshake
None
, Xon/Xoff, Hardware
Alt Pirnt CMD
'a' ~ 'z', 'A' ~ 'Z',
P
Alt Tare CMD
'a' ~ 'z', 'A' ~ 'Z',
T
Alt Zero CMD
'a' ~ 'z', 'A' ~ 'Z',
Z
Reset
No/
Yes
Print Setup
Assignment
Demand
Stable Only
Off
, On(LFT Force On)
Auto On Stable
Mode
Load
, Load and Zero
Auto On Accept
Interval
Time
1
~50000
MT-Continuous
OH-Continuous
SICS
Reference Balance
