6
Defender 5000 Indicators Service Manual
1.5 CONTROL FUNCTIONS
Button
Action
Short press: If the terminal is Off, power on the terminal; if the terminal is On, clear the
data input.
Long press: Power off the terminal.
Short press: Send the current display value to RS232 port in the case where the
"Communication -> RS232 setup->Assignment->Demand" is "On".
Long press: Change the current weighing unit. Press and hold the key to scroll through
the list of enabled units. Release the key to switch to the unit selected.
Short press: Press the key to enter the Library.
Long press: Press and hold this key to change weighing modes. Press and hold the key
to scroll through all weighing modes. Release the key to switch to the mode selected.
Short press: Press the key to enter user profile.
Long press: Press the key to enter user menu.
The soft keys correspond to several icons at the bottom of the display area. These icons
indicate configuration, ID input, accumulate, exit, etc. (available in certain
circumstances).
To enter ‘2’-‘9’, press the numeric button in the mode of numeric input.
To Enter ‘A’, press
2 times in the mode of uppercase input. To
enter ‘Z’, press
5 times in the mode of lowercase input.
To enter ‘0’, press the button in the mode of numeric input. To enter a
space, press the button in the mode of uppercase or lower case input.
To enter '1', press the button in the mode of numeric input. To enter '#'
or '/', press the button in the mode of uppercase input. To enter '@', '_'
or '&', press the button in the mode of lowercase input.
Switch between three input modes, namely, numeric, lowercase and
uppercase input.
To enter '.', press the button in the mode of numeric input. To enter '+' or
'-', press the button in he mode of uppercase or lowercase input.
Short press: When the load on the pan is within the zero range, press this key to set the
display to zero.
Short press: When a tare has been entered and the load on the pan is within the zero
range, press this key to clear the tare value and set the display to zero.
Short press: When a container is on the pan, press this key to store the weight of the
container as the tare value.
Short press: Enter the known weight of a container using the numeric keypad, and then
press this key to establish the preset tare value.
Short press: When a tare has been entered, empty the pan and press this key to clear
the tare value.
Long press: If a preset tare has been entered, press this key to view the preset tare
value.
