OHAUS Defender 5000 TD52P, Service Manual

Page: 27 / 55

23 Defender 5000 Indicators Service Manual
Application Mode
& Discrete I/O
Options (bold is default)
Discrete Output1 Off , Overload, Underload, Zero
Discrete Output2 Off , Overload, Underload, Zero
Discrete Output3 Off , Overload, Underload, Zero
Discrete Output4 Off , Overload, Underload, Zero
Reset
2.7 Weighing Unit
Enter this menu to activate the desired units. Default settings are bold .
NOTE: Due to national laws, the indicator may not include some of the units of measure listed. If the
Security Switch is set to ON, the Units are locked at their current setting.
2.7.1 Gram (g)
Set the status.
Off = Disabled
On = Enabled
2.7.2 Kilogram (kg)
Set the status.
Off = Disabled
On = Enabled
2.7.3 Pound (lb)
Set the status.
Off = Disabled
On = Enabled
2.7.4 Ounce (oz)
Set the status.
Off = Disabled
On = Enabled
2.7.5 Pound: Ounce (lb: oz)
Set the status.
Off = Disabled
On = Enabled
2.7.6 Tonne (t)
Set the status.
Off = Disabled
On = Enabled
2.7.7 Ton (ton)
Set the status.
Off = Disabled
On = Enabled