30
Defender 5000 Indicators Service Manual
Expand reading is the internal calculation result, which should be up and down following with the Ramp
changes.
2.10.3 Firmware Update
Please refer to "APPENDIX C. Software Update via Micro SD card" for the software update.
2.10.4 Factory Reset
Reset the indicator the initial setup.
2.10.5 Board Info
Scroll down the menu to the Board Info, enter this Menu you will find the software version and the PCB
series number
3 MAINTENANCE
CAUTION: DISCONNECT THE UNIT FROM THE POWER SUPPLY BEFORE CLEANING.
3.1 Model T52P Cleaning
The housing may be cleaned with a cloth dampened with a mild detergent if necessary.
Do not use solvents, chemicals, alcohol, ammonia or abrasives to clean the housing or control
panel.
3.2 Model TD52XW Cleaning
Use approved cleaning solutions for the stainless-steel Indicator housing and rinse with water. Dry
thoroughly.
Do not use solvents, chemicals, alcohol, ammonia or abrasives to clean the control panel.
