DIAM3100©2012 AUGIER SA.
II-37
II.2.2.2 Ethernet link:
Interface board connections:
DIAM3100 CCR can be equipped with one or two Ethernet interfaces. The used protocol is
MODBUS TCP
(port
502).
Supplied functions are : function 3 (number of words <= 100), function 6.and function 16 (number of words =1)
Slave ID = 1.
IP parameters:
Ethernet interface number
Default mask and address
Maximum number of sockets (clients)
1
Mask: 255.255.255.0
Address: 192.168.100.160
2
2
Mask: 255.255.255.0
Address: 192.168.100.161
2
The IP mask (4 bytes) and the IP adress (4 bytes) are configurable in the following menu:
Parametres TCP/IP
esc
OK
Communication is shown on the display, by mean of 2 arrows in & out :
Connection of the network is made at the rear of the CCR (RJ45 8 pins)
The JBUS table is described in appendix b: jbus table
Io:5.20A <B4>
stop
local
auto
menu
Summary of Contents for AUGIER energy DIAM3100 Series
