OCEM AUGIER energy DIAM3100 Series, Installation & Maintenance

Page: 60 / 68

DIAM3100©2012 AUGIER SA.
VI-60
Adr. R/W Mode Memory Label Detail Bit clear Bit set Default
Value Comments
69 R/W Sup Eeprom Parameters 1 Bit0
Without “ON” order With “ON” order
0
Run Order “ON”
Bit1 Run to B0 Run to B1 0 Default brightness
Bit2 Live Voltage Current flow in the loop 0
Bit3
Standard remote
priority
Reverse remote
priority
0
Bit4 Loop power Ground insulation 0 4-20mA loop current outputs
Bit5 No remote fail safe Remote fail safe 0 Option
Bit6 Ciruit selector:
Alternate
Circuit selector:
Simultaneous
0 Option circuits selector
Bit7 No Fluo pannel regul. Fluo pannel regulation 0 Fluo pannel regulation
Bit8 EFD HV always
present
EFD HV if loop current 0 EFD High Voltage supply (500V--)
Bit9 No Ii measurement Ii meausrement 1
70 R/W Eeprom Interface board control Bit0 External Uaux supply Internal Uaux supply 0 U control voltage type Ext/Int
Bit1 24V-- Uaux supply 120V~ Uaux supply 0 U control voltage 24V--/120V~
Bit2 Simple Jbus link Double Jbus link 0 If Jbus option
Bit3 No Lonworks link Lonworks link 0 Option
Bit4 FAA type IEC type 0 Standard type
Bit5 Simple TCP/IP link Double TCP/IP link 0 If TCP/IP option
Bit6 Wire common - Wire 0 Wire control polarization
71 R/W Cal Eeprom Calibrating current 660 *10mA (1 to 6.8Arms)
72 R/W Cal Eeprom Io equalizer 1000 800 to 1200
73 R/W Cal Eeprom Uo equalizer 1000 500 to 2000
74 R/W Cal Eeprom Ui equalizer 1000 500 to 2000
75 R/W Cal Eeprom Ii equalizer 1000 500 to 2000
76 R Eeprom Operating time clock H2, H1 see note 1
77 R Eeprom Operating time clock H0, M, see note 1
78 R Eeprom Powered-on time clock H2, H1, see note 1
79 R Eeprom Powered-on time clock H0, M, see note 1
80 R Eeprom Brightness B0 time clock H2, H1, see note 1
81 R Eeprom Brightness B0 time clock H0, M, see note 1
82 R Eeprom Brightness B1 time clock H2, H1 see note 1
83 R Eeprom Brightness B1 time clock H0, M see note 1
84 R Eeprom Brightness B2 time clock H2, H1 see note 1
85 R Eeprom Brightness B2 time clock H0, M see note 1