OCEM AUGIER energy DIAM3100 Series, Installation & Maintenance

Page: 65 / 68

DIAM3100©2012 AUGIER SA.
VI-65
Adr. R/W Mode Memory Label Detail Bit clear Bit set Default
Value Comments
190 R Ram Word 1 switch over
191
192 R Ram Word 2 switch over
193
194 R/W Sup Soft download 85 in decimal
195 R Ram Mother board number
196 R/W Sup Eeprom Main menu display number 0 0: Output current, Brightness
1: Output current, Output voltage
2: Output current, Output power
3: Selector position (if option
present)
197 R/W Sup Eeprom Circuit selector: Circuits qty 5 1 to 5 (OPTION)
198 R/W Sup Eeprom Circuit selector: Circuit in local
mode 0 0 to 5 in alternate mode, 0 to 31 in
simultaneous mode (OPTION)
199 R/W Eeprom Circuit selector: Circuit in
remote mode
0 0 to 5 in alternate mode, 0 to 31 in
simultaneous mode (OPTION)
200..
230
231 R/W Sup Eeprom Parameters 2 Bit0 Photo MOS
TCTS board Relay
TCTS board 1 for FAA standard
Bit1 ILS load plate No ILS load plate 1
Bit2 No power drop
measure
Power drop measure 1 for FAA standard
Bit3 6.6A nominal 20A nominal 0
Bit4 Reset by switch Reset by power up 0
Bit5 No external selector External selector 0 Lonworks Selector
Bit6 AENA2004 0 transformer temp protection
232..
248
249 R Ram Lonworks interface flags
250..
511
Note1 : The 4 bytes are coded: H2-H1-H0-M (H2,H1,H0 to compute the hours and M for minutes)
Example: Reading operating time:
Contents of address @106: 0x0102 in Hexadecimal, and of address @108 : 0x0324 in hexadecimal
The time is interpreted as: 0x010203 hours and 0x24 minutes (66051 Hours and 36 minutes)
R: Read, W :Write
Mode “Sup”: Write access via ID 250
Mode “Cal”: Words used for calibrating the device (DO NOT USE)