Ocean Optics Flame-S, User Manual

Page: 95 / 130

8: Firmware and Advanced Communications
225-00000-000-11-201604 85
Integration Time (16 bit)
Sets the Flame’s integration time, in milliseconds, to the value specified.
Command Syntax: I{16 bit
DATA WORD
}
Response: ACK or NAK
Range: 1 - 65000
Default value: 10
Integration Time (32 bit)
Sets the Flame’s integration time, in microseconds, to the value specified.
Command Syntax: i{32 bit
DATA WORD
}
Response: ACK or NAK
Range: 1000
– 65,000,000
Default value: 10,000
Lamp Enable
Sets the Flame’s Lamp Enable line to the value specified
Command Syntax: J{
DATA WORD
}
Value:
0 = Light source/strobe off
—Lamp Enable low
1 = Light source/strobe on
—Lamp Enable high
Response: ACK or NAK
Default value: 0
Baud Rate
Sets the Flame’s baud rate.
Command Syntax: K{
DATA WORD
}
Value:
0=2400 1=4800 2=9600
3=19200 4=38400 5=Not Supported 6=115,200
Response: See below
Default value: 2
When changing baud rates, the following sequence must be followed: