Ocean Optics Flame-S, User Manual

Page: 88 / 130

8: Firmware and Advanced Communications
78 225-00000-000-11-201604
Register
Address
Description
Default
Value Min
Value Max
Value
Time Base
0x2C
&*
Trigger Mode
0 = Free Running
1 = External Hardware Level Trigger
1 = External Synchronization Trigger
3 = External Hardware Edge Trigger
0 0 4 N/A
0x30 Reserved
0x38
Single Strobe High Clock Transition Delay
Count
1 0 0xFFFF 2MHz
0x3C
Single Strobe Low Clock Transition Delay
Count
5 0 0xFFFF 2MHz
0x40 Lamp Enable 0 0 1 N/A
0x48
GPIO Mux Register
0: pin is GPIO pin
1: pin is alternate function
0 0 0x03FF N/A
0x50
GPIO Output Enable
1: pin is output
0: pin is input
0 0 0x03FF N/A
0x54
GPIO Data Register
For Output: Write value of signal
For Input: Read current GPIO state
0 0 0x03FF N/A
0x58 Reserved
0x5C Offset Value 0 0 0xFFFF N/A
0x60
Offset Control
Bit 0 = Enable Auto-Nulling
Bit 1 = Enable Auto-Nulling Saturation
0 0 0xFFFF N/A
0x64 FPGA Programmed (Read Only) 0x5501 N/A N/A N/A
0x68 Maximum Saturation Level 0x55F0 0 0xFFFF N/A