manualshive.com logo in svg

Ocean Optics Flame-S, User Manual

Share
Download
Ocean Optics Flame-S User Manual Download Page 2

 

 

AMERICAS & WORLD HEADQUARTERS 
 

Phone: 

+1

 

727-733-2447 

Fax:

 

 

 +1 727-733-3962 

 

Sales:       

[email protected] 

   

Orders:         [email protected]  
Support:        [email protected]  
 

 

EUROPE, MIDDLE EAST & AFRICA 

 

Phone:

 +31 26-319-0500 

Fax:

      +31 26-319-0505 

Email:

   [email protected] 

 
Germany : +49 711-341696-0

 

UK :         +44 1865-811118 
France :    +33 442-386-588 

 

ASIA 

 

Phone:

 +86 21-6295-6600 

Fax:

      +86 21-6295-6708 

Email:

  [email protected] 

 

Japan & Korea: +82 10-8514-3797 

 
 

www.oceanoptics.com 

Copyright © 2015 Ocean Optics, Inc.

 

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, by any means, 
electronic, mechanical, photocopying, recording, or otherwise, without written permission from Ocean Optics, Inc. 

Trademarks

 

All products and services herein are the trademarks, service marks, registered trademarks or registered service marks of their 

respective owners. 

Limit of Liability

 

Every effort has been made to make this manual as complete and as accurate as possible, but no warranty or fitness is implied. The 
information provided is on an “as is” basis. Ocean Optics, Inc. shall have neither liability nor responsibility to any person or entity 

with respect to any loss or damages arising from the information contained in this manual. 

 

Ocean Optics, Inc. 

830 Douglas Ave. 
Dunedin, FL 34698 
USA 
 

Manufacturing & Logistics 

4301 Metric Dr. 
Winter Park, FL 32792 

USA 

Ocean Optics Asia 

666 Gubei Road 
Kirin Tower Suite 601B  
Changning District 
Shanghai 
PRC, 200336 

Sales & Support 

Geograaf 24  
6921 EW Duiven 
The Netherlands 
 

Manufacturing & Logistics 
Maybachstrasse 11

 

73760 Ostfildern

 

Germany  

Summary of Contents for Flame-S



































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands