Oce VarioPrint 1055, Configuration And Maintenance Manual

Page: 84 / 176

84 Chapter 10 The interrupt mode
Disable the Interrupt function
Disable the Interrupt function
Introduction
The Interrupt function allows users to suspend a large job, so that a new job can be
started. The suspended job continues, when the new jobs are completed and the user
resumes the suspended job.
You can disable the Interrupt function, when the Interrupt function proves to be
unacceptable to the users.
Before you begin
Enter the Key operator system ( see ‘Enter or quit the key operator system’ on
page 32 ).
Note: When a Copy control device or an external finisher is installed, the Interrupt
function does not work.
Illustration
[64]
[64] Disable the Interrupt function
How to disable the Interrupt function
1.
Press the 'Machine' key.
2.
Select the 'Console defaults' tab.
3.
Press the 'Interrupt mode' key to select 'Disabled'.
Check
1.
Quit the Key operator system.
2.
To check the selection, make a test copy job.