Oce VarioPrint 1055, Configuration And Maintenance Manual

Page: 150 / 176

150 Chapter 17 Troubleshooting for the Network Printer
Stop automatic printing
Stop automatic printing
Introduction
You can stop automatic printing, to allow the processing of copy, mailbox or scan
jobs. The automatic print jobs remain in the print queue. To resume the printing of
the automatic print jobs, restore the setting in the key operator system.
The users can still initiate automatic print jobs when automatic printing has been
stopped.
Before you begin
Enter the Key operator system ( see ‘Enter or quit the key operator system’ on
page 32 ).
Note: The Océ VarioPrint
®
1055/65/75 allows you to prevent automatic printing,
so that all print jobs are stored in the mailbox.
Controlling automatic printing
1.
Press the 'Print settings' key.
2.
Select the 'Maintenance' tab.
3.
Press the 'Automatic printing' key to select 'Stop' or 'Continue'.
Illustration
[116]
[116] Stop automatic printing
Check
1.
Exit the key operator system.
2.
To check the selection, start a print job.
Enter the settings for an automatic print job in the Océ VarioPrint
®
1055/65/75
printer driver.
The automatic print job is not printed until you again change the setting to continue
the automatic printing.