Oce VarioPrint 1055, Configuration And Maintenance Manual

Page: 137 / 176

137
Add the staples
[105]
Adding the new staple cartridge
1.
Remove any individual staples that have remained in the staple path and on the anvil.
2.
Slide a new staple cartridge in the stapler unit until the cartridge clicks into place.
Closing the stapler unit
1.
Turn over the stapler unit.
2.
Pull the lever of the stapler unit backwards and push down the stapler as far as it goes.
Release the lever.
3.
Move the latch forwards and tighten the screw.
Closing the covers and doors
1.
Lower the top cover.
2.
Slide the frame to the left until the frame locks in position.
3.
Close the paper-compartment door.
Check
Staple a set manually until the first staple is inserted to test the new staple cartridge.