Oce CS9160, User Manual

Page: 113 / 131

User’s Guide Océ CS9160 printer
113 AP-40790 – Rev 2.0 -23/08/2011,
5.2 DONE BY AUTHORIZED OCÉ TECHNICIAN
This section describes the periodical part replacement and the periodical inspections required for this printer.
These periodical services ensure the stable printing quality of the printer.
5.2.1 Periodical replacement of parts
Perform periodical replacements according to the table below. These replacements must be executed by an
authorized Océ technician. These replacements are necessary to ensure the best printing quality output.
Part Timing
Maintenance station Once a year
Wiper Once a year
Damper Once a year
5.2.2 Periodical inspection part list
Perform periodical inspections according to the table: “Periodical Inspection Part List” and perform cleaning
and part replacement as necessary.
Part Timing Check point
Media guide
Sub platen front surface
Once a year
• Media dust accumulation
• Foreign objects
•
Damages
Timing fence
(CR encoder detection slit plate)
Once a year
•
Media dust accumulation
•
Foreign objects
•
Damages
Rail on the CR guide frame Once a year •
Foreign objects
P_REAR sensor front surface Once a year
•
Media dust accumulation
•
Foreign object