Oce CS9160, User Manual

Page: 78 / 131

User’s Guide Océ CS9160 printer
78 AP-40790 – Rev 2.0 -23/08/2011,
4.7.1.11 Dryer menu
Notes
•
Temperature to be set for the after Heater varies depending on the media which is used. For
recommended temperature settings of the after heater, refer to the "Recommended media list".
Setup Item Setting Value Description
After Heater
OFF / <30° C> to 50° C
Set up the after Heater temperature.
1. Roll media
2. Dryer- After heater
3. Print
head
—
•
[Enter] key: Save the setting and shift to the
previous hierarchy.
• [Cancel] key: Cancel the setting and shift to
the previous hierarchy.
► User media menu
4.7.1.12 Standby Heating menu
Set up whether each heater is preheated (idle heat) while in standby mode.
Setup Item Setting Value Description
StandbyHeating
10 min to <60
min> to 240 min
Sets the length of time to preheat the heaters. When more than
the set time has passed, each heater switches off
—
•
[Enter] key: Save the setting and shift to the previous
hierarchy.
• [Cancel] key: Cancel the setting and shift to the previous
hierarchy.
► User media menu
4.7.1.13 Vacuum Fan menu
Setup Item Setting Value Description
Vacuum Fan
Low Set when using soft media
<High> Set when regular media is used.
—
• [Enter] key: Save the setting and shift to the previous
hierarchy.
•
[Cancel] key: Cancel the setting and shift to the previous
hierarchy.
► User media menu
2 3
1