User’s Guide Océ CS9160 printer
100
AP-40790 – Rev 2.0 -23/08/2011,
5.1.2 Weekly maintenance
5.1.2.1 Cleaning the wiper
Clean the wiper once a week or when blurs or incompleteness in printing remains after the head cleaning.
Notes
•
Use the cleaning stick when cleaning the wiper.
Step 1 :
If the printer is switched ON, make sure that:
•
Printing or other operations are not in progress.
•
The display is in the normal state.
Step 2 :
Display the CR Maintenance menu on the operation panel.
Step 3 :
Press the [Menu] key.
•
“Menu 1: Setup>” is displayed.
•
The operation panel shifts to the setup menu display.
Step 4 :
Press the [>] key.
•
“Set1: MediaType” is displayed.
Step 5 :
Press the [+] key or [-] key to select “Set20: CR Maintenance”.
Step 6 :
Press the [ENTER] key.
•
“CR Mainte.: Start” is displayed.
•
The display enters the CR Maintenance menu.
Step 7 :
Press the [ENTER] key.
•
Maintenance
starts.
•
The print head moves to the left.
•
The wiper moves forward.
•
“CR Maintenance: End” is displayed.
Summary of Contents for CS9160
