Oce CS9160, User Manual

Page: 96 / 131

User’s Guide Océ CS9160 printer
96 AP-40790 – Rev 2.0 -23/08/2011,
4.8.5.2 Settings that can be changed or confirmed while printing.
Notes
•
The Print start menu is displayed only when the printer is warming up.
•
When you change a setting during operation, be sure to select “Backup” to save the setting that
you changed.
• If the printer returns to Normal without “Backup” being selected, the changed setting is not
saved
Setup Item Setting Description
Print Start ----
[ENTER] key: if the heater temperature does not
reach the set value during warming-up, printing
starts.
Temperature
Pre Check the current Pre Heater temperature.
Platen Check the current Platen Heater temperature
After Check the current After Heater temperature
Pre Heater OFF / 30°C to 50°C Change the Pre Heater temperature
Platen Heater OFF / 30°C to 50°C Change the Platen Heater temperature
After Heater OFF / 30°C to 50°C Change the After Heater temperature
PF Adjust -20 pulse to 0 to 20 pulse Change the feed adjustment value
Backup ---- [ENTER] key: Save the changed setting.
---- [CANCEL] key: the printer returns to normal.