User’s Guide Océ CS9160 printer
112
AP-40790 – Rev 2.0 -23/08/2011,
5.1.5 Head cleaning
When to perform?
Perform a head clean if the prints become blurred or are incomplete.
Notes
•
Remove media while cleaning.
Step 1 :
Verify that the operation panel is in Normal mode.
Step 2 :
Verify that the media hold lever is lowered
Step 3 :
Press the [>] key to select the cleaning mode.
Step 4 :
Press the [Cleaning] key for at least 2 seconds.
Result: The operation panel displays “Cleaning **%”.
Step 5 :
Start the head cleaning.
Notes
•
Pressing the [Cleaning] key again after the 1st head cleaning performs a strong cleaning. If you
fail to remove blurs or incompleteness of printing in one head cleaning, perform a strong
cleaning.
•
If you fail to remove blurs or incompleteness of printing with several head cleaning, refer to
Troubleshooting, and perform the adequate process.
Summary of Contents for CS9160
