Oce CS9160 User Manual Download Page 38

Page: 38 / 131

User’s Guide Océ CS9160 printer

AP-40790 – Rev 2.0 -23/08/2011,

Step 8 :

Attach the protective material (metal plate) to the head unit, and fix it with thumbscrews.

N° Name

1 Head

unit

2 Butterfly

screw

Head unit fastening material (metal plate)

Step 9 :

Open the right maintenance cover and the front cover

Step 10 :

Install the plastic bar while lifting the carriage.

Step 11 :

The plastic bars are installed to both right and left side of the carriage.

Step 12 :

Remove the printer from the stand. Refer to: “

Installation guide”

Step 13 :

Repack the printer.

Post-transport procedure

Step 1 :

To perform unpacking, assembling, and placing the printer. Please refer to: “

Installation guide”

Set the printer in an available condition. Please refer to “

Transferring the printer” and “Steps after

transfer”.

Y rail

CR belt fixing
plate

Carriage fixing
shaft

Summary of Contents for CS9160




































































































































Search results

Summary of Contents for CS9160

Reviews:

Related manuals for CS9160

Brands by name

Popular brands

Oce CS9160, User Manual

Search results

Summary of Contents for CS9160

Reviews:

Related manuals for CS9160

Brands by name

Popular brands